當前位置：東莞市藹群實業有限公司>>100G QSFP28>>100G QSFP28 有源光纜

100G QSFP28 有源光纜

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價 收藏產品查看聯系電話

百分零部件網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2024-04-01 22:44:45瀏覽次數：150次

聯系我時，請告知來自百分零部件網

產品分類 品牌分類

  100G QSFP28

全部產品列表

暫無信息

東莞市藹群實業有限公司

經營模式：其他

商鋪產品：1條

所在地區：

聯系人：王先生

詢價 給他留言

產品簡介

100GQSFP28有源光纜描述AOC，即ActiveOpticalFiber有源光纜

詳細介紹

100G QSFP28 有源光纜

描述

AOC，即Active Optical Fiber 有源光纜。通信過程中需要光收發器件，將電信號轉換為光信號，或?qū)⒐庑盘?hào)轉換為電信號的通信線纜，光纜兩端的光收發器提供光電轉換以及光傳輸功能。AOC主要由多模光纖、光收發器件、控制芯片、并行光模組成，傳輸速率高、傳輸距離長、能耗低、使用方便，幫助通信設備享受到光傳輸?shù)木薮髢?yōu)勢。

100G高速線纜,有源光纜,通信線纜

產品特性

1. 全雙工 4 通道 850nm 并行有源光纜

2. 每通道數據傳輸速率高達 28.05Gbps

3. 在 OM3 多模光纖上的鏈路長度為 150 米

4. 高可靠性 850nm VCSEL 技術

5. 電氣熱插拔

6. 外殼工作溫度范圍：0°C 至 70°C

7. 每電纜端功率耗散 < 2.5 W

應用范圍

100G 以太網

Infinibａnd QDR

光纖通道

高性能計算互連

標準

符合 QSFP28 MSA

符合 RoHS 規范

Product selection

Part Number	Product description
QSFP28-AOC-XXX	XXX=different cable lengths on OM3 Multimode Fiber (MMF)，max 150m –Note
XXX	cable lengths on OM3 Multimode Fiber (MMF)
003	3m
005	5m
007	7m
010	10m

Note：

More detail product selection and cable lengths，please contact sales。

Ⅰ Absolute Maximum Ratings

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Storage Temperature	Ts	-40	-	85	oC
Relative Humidity	RH	5	-	95	%
Power Supply Voltage	VCC	-0.3	-	4	V
Signal Input Voltage		Vcc-0.3	-	Vcc+0.3	V

Ⅱ Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Case Operating Temperature	Tcase	0	-	70	oC	Without air flow
Power Supply Voltage	VCC	3.14	3.3	3.46	V
Power Supply Current	ICC	-		750	mA	per cable end
Data Rate	BR		25.78125		Gbps	Each channel

Ⅲ General Product Characteristics

Parameter	Value	Unit	Notes
Module Form Factor	QSFP28
Number of Lanes	4 Tx /Rx
Maximum Aggregate Data Rate	112.2	Gb/s
Maximum Data Rate per Lane	28.05	Gb/s
Standard Cable Lengths	3, 5, 7, 10	meters	Other lengths, please contact sales
Protocols Supported	Typical applications include Infiniband, Fiber Channel, 100G Ethernet
Electrical Interface and Pin-out	38-pin edge connector		Pin-out as defined by the QSFP28 MSA
Standard Optical Cable Type	Multimode ribbon fiber cable assembly, riser-rated
Maximum Power Consumption per End	2.5	W
Management Interface	Serial, I2C-based, 400 kHz maximum frequency		As defined by the QSFP28 MSA

Note： 100GBASE-SR4 ａnd ITU-T OTU4 has different register setting ，not auto- Negotiatio

IV. High-speed Electrical Characteristics per Lane

Parameter-Inputs	Symbol	Min	Typ		Max	Unit	NOTE
Input electrical specifications (per Lane)
Differential Voltage pk-pk					900	mV
Common Mode Noise RMS					17.5	mV
Differential Termination Resistance Mismatch					10	%
Differential Return Loss	SDD22	Per OIF CEI-28G-VSR and CAUI-4 requirements
Common Mode to Differential conversion and Differential to Common Mode Conversion	SDC22, SCD22					dB
	SDC22, SCD22					dB
Common Mode Return Loss	SCC22					dB
Transition Time, 20 to 80%	Tr, Tf	10				ps
Common Mode Voltage	Vcm	-0.3			2.8	V
Eye Width at 1E-15 probability	EW15	0.46				UI
Eye Height at 1E-15 probability	EH15	94				mV
Output electrical specifications (per Lane)
Differential Voltage pk-pk					900	mV
Common Mode Voltage	Vcm	-350			2850	mV
Common Mode Noise RMS					17.5	mV
Differential Termination Resistance Mismatch					10	%
Differential Return Loss	SDD22	Per OIF CEI-28G-VSR and CAUI-4 requirements				dB
Common Mode to Differential conversion and Differential to Common Mode Conversion	SDC22, SCD22					dB
	SDC22, SCD22					dB
Common Mode Return Loss	SCC22					dB
Output Rise and Fall time (20% to 80%)	tRH, tFH	9.5				ps
Vertical Eye Closure	VEC			5.5		dB
Eye Width at 1E-15 probability	EW15	0.57				UI

V. Pin Assignment

Figure 4---Pin out of Connector Block on Host Board

Pin	Symbol	Name/Description	NOTE
1	GND	Transmitter Ground (Common with Receiver Ground)	1
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data output
4	GND	Transmitter Ground (Common with Receiver Ground)	1
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data output
7	GND	Transmitter Ground (Common with Receiver Ground)	1
8	ModSelL	Module Select
9	ResetL	Module Reset
10	VccRx	3.3V Power Supply Receiver	2
11	SCL	2-Wire serial Interface Clock
12	SDA	2-Wire serial Interface Data
13	GND	Transmitter Ground (Common with Receiver Ground)
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Transmitter Ground (Common with Receiver Ground)	1
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Transmitter Ground (Common with Receiver Ground)	1
20	GND	Transmitter Ground (Common with Receiver Ground)	1
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Transmitter Ground (Common with Receiver Ground)	1
24	Rx4n	Receiver Inverted Data Output	1
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Transmitter Ground (Common with Receiver Ground)	1
27	ModPrsl	Module Present
28	IntL	Interrupt
29	VccTx	3.3V power supply transmitter	2
30	Vcc1	3.3V power supply	2
31	LPMode	Low Power Mode，not connect
32	GND	Transmitter Ground (Common with Receiver Ground)	1
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Output
35	GND	Transmitter Ground (Common with Receiver Ground)	1
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Output
38	GND	Transmitter Ground (Common with Receiver Ground)	1

Notes:

1. GND is the symbol for signal and supply (power) common for QSFP+ modules. All are common within the QSFP+ module and all module voltages are referenced to this potential unless otherwise noted. Connect these directly to the host board signal common ground plane.

2. VccRx, Vcc1 and VccTx are the receiving and transmission power suppliers and shall be applied concurrently. Recommended host board power supply filtering is shown below. Vcc Rx, Vcc1 and Vcc Tx may be internally connected within the QSFP28 transceiver module in any combination. The connector pins are each rated for a maximum current of 500mA.

VI. Host - Transceiver Interface Block Diagram

VII. Outline Dimensions（Unit：mm）

100G QSFP28 AOC-Datasheet.pdf