深圳市中天華威電子有限公司
深圳市中天華威電子有限公司
1.Supports HiSilicon Fast Charging Protocol (FCP).2.Supports Qualcomm?Quick ChargeTM 2.0/3.0 Class A : 3.6V up to 12V Output Voltage.3.Automatically Selects FCP and QC2.0/3.0 Protocols.4.Supports USB DCP Shorting D+ Line to D? Line per USB Battery Charging Specification, Revision 1.2.5.Complies with Chinese Telecommunication Industry Standard YD/T 1591-2009.6.Supports USB DCP Applying 2.7V on D+ Lineａnd 2.7V on D? Line.
產品參數
管腳封裝：
| IC管腳示意圖 | 管腳號 | 管腳名稱 | 描述 |
| | 1 | D+ | USB D+ data line. Recommended this pin connect without resistors(open) or with a resistor higher than 1MΩ connect to GND |
| 2 | GND | Ground pin | |
| 3 | FBO | Feedback output pin. Current sink/source FB node | |
| 4 | QC_EN | QC_enable: QC2.0/3.0 and FCP function are enabled by either logic high or high-Z. Contrarily, QC2.0/3.0 and FCP function are disabled by logic low | |
| 5 | VDD | Power supply input pin | |
| 6 | D- | USB D? data line | |
| | | |
訂購信息：
| 定購型號 | 封裝 | 包裝形式 | 絲印 |
| FP6601QS6 | SOT23-6 | 盤裝 3000顆/盤 | FP6601QS6 |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
百分零部件網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
