EDI工作原理
首先是填充在模堆中的樹脂吸附原水中的離子而達到脫鹽的目的模堆兩端電極上的直流電使模堆內部產生電位差,從而促使陽離子向陰極移動,陰離子向陽極移動,陰、陽離子進入濃縮室淡水室水電阻率升高到一定極限,水分子電離分散生成H+和OH-,以保持淡水室內的樹脂經常處于再生狀態,實現連續脫鹽。
EDI的特點
1、脫鹽率高
2、水利用率高達95%
3、樹脂無需酸堿再生
4、運行、操作、維護方便
5、視產水要求可將模塊不斷堆積,以適應更大產水量的要求
6、流量范圍從1到450m3/h
7、運行成本低,能耗少,每產水3.8m3/h,耗電IKW
Electropure EDI模塊技術參數EDI Module Technical Parameters
模塊型號Module Model | XL-500-L | XL-500 | XL-400 | XL-300 | XL-200 | XL-100 |
產水流量范圍 Product Flow Range, m3/h( gpm) | 1.6 to 3.35 (7to 14?) | 1.3 to 2.3 (6 to 10) | 0.7 to 1.5 (3 to 7) | 0.3 to 0.9 (1? to 4) | 0.1 to 0.3 (? to 1?) | 0.05 to 0.15 (? to ?) |
大產水流量 Maximum Product Flow,m3/h( gpm) | 3.95 (17?) | 3.0 (13) | 1.9 (8?) | 1.3 (5?) | 0.45 (2?) | 0.2 (1) |
產水電阻率 Product Resistivity, MΩ.CM | 16~18.2 | 16~18.2 | 16~18.2 | 16~18.2 | 16~18.2 | 16~18.2 |
回收率 Recovery Rate,% | 90~95 | 90~95 | 90~95 | 90~95 | 90~95 | 90~95 |
操作電壓 Operating Voltage, VDC | 350 (200-390) | 300 (200-320) | 200 (150-220) | 150 (120-160) | 100 (60-120) | 48 (30-60) |
設計電壓 Design Voltage,VDC | 500 | 500 | 400 | 300 | 200 | 100 |
操作電流 Operating Current, A | 1~3 | 1~3 | 1~3 | 1~3 | 1~3 | 1~3 |
設計電流 Design Current, A | 8 | 8 | 8 | 8 | 8 | 8 |
進水壓力Feed Pressure, MPa(bar) | 0.15~0.5 (1.5~5) | 0.15~0.5 (1.5~5) | 0.15~0.5 (1.5~5) | 0.15~0.5 (1.5~5) | 0.15~0.5 (1.5~5) | 0.15~0.5 (1.5~5) |
進水/產水壓力降Feed-Product Pressure Drop, MPa(bar) | 0.14~0.35 (1.4~3.5) | 0.14~0.3 (1.4~3) | 0.1~0.21 (1~2.1) | 0.1~0.14 (1~1.4) | 0.07~0.17 (0.7~1.7) | 0.07~0.17 (0.7~1.7) |
濃水壓力降Concentrate Pressure Drop,MPa(bar) | 0.06~0.08 (0.6~0.8) | 0.06~0.08 (0.6~0.8) | 0.05~0.07 (0.5~0.7) | 0.05~0.06 (0.5~0.6) | 0.04~0.06 (0.4~0.6) | 0.03~0.05 (0.3~0.5) |
極水壓力降Electrolyte Pressure Drop,MPa(bar) | 0.14~0.17 (1.4~1.7) | 0.14~0.17 (1.4~1.7) | 0.11~0.14 (1.1~1.4) | 0.09~0.11 (0.9~1.1) | 0.07~0.09 (0.7~0.9) | 0.05~0.08 (0.5~0.8) |
溫度范圍Temperature,℃ | 5~35 | 5~35 | 5~35 | 5~35 | 5~35 | 5~35 |
進水PH Feed Water PH | 5~9.5 (建議7~8 Optimum7~8) | 5~9.5 (建議7~8 Optimum7~8) | 5~9.5 (建議7~8 Optimum7~8) | 5~9.5 (建議7~8 Optimum7~8) | 5~9.5 (建議7~8 Optimum7~8) | 5~9.5 (建議7~8 Optimum7~8) |
注: 這些技術參數僅供參考,準確的技術參數請見OEM工程手冊。