Type&spec.

WDW-1/2/5/10

WDW-20

WDW-50

WDW-100

WDW-200/300

WDW-500/600

試驗力 (KN)

Max. load (KN)

10

20

50

100

200/300

500/600

有效測量范圍

Effective measuring range

0.4%-FS

試驗力分辨率Resolution of testing value

1/±300000

示值精度

Precision of indicating value

±0.5%

±0.5% (optional)

拉伸距離 (mm)

Max.tensile distance (mm)

800 (或按要求)

800 or can be made as required

壓盤間距離 (mm)

Max. space between upper and lower platens (mm)

700或按要求

700 or can be made as required

控制模式Control mode

微機，位移、應力、應變?nèi)]環控制Computer,three closed loop control of displacement, stress, and strain

三閉環控制調節范圍及精度Range and accuracy of three closed-loop control

力控速率調節范圍Adjusting range of load control:0.005%-5%FS/S

力控速率控制精度Adjusting range of control rate of load: 速率 ＜0.05%FS時，為±1%設定值以內；When rate<0.05%fs/s, the precision is within ±1% of setting value;

速率 ≥0.05%FS時，為±0.5%設定值以內；When rate ≥0.05%FS/s, the precision is within ±0.5% of setting value;

變形速率調節范圍Adjusting range of deformation rate：0.005～5%FS/s：0.005～5%FS/s；

變形速率控制精度Control precision of deformation rate：速率＜0.05%FS/s時，為設定值的±1%以內；When rate<0.05%fs/s, the precision is within ±1% of setting value;

速率≥0.05%FS/s時，為設定值的±0.5%以內；When rate≥0.05%FS/s, the precision is within ±2% of setting value;

位移速率調節范圍Adjusting range of displacement rate： 0.005～500mm/min；

位移速率控制精度Control precision of displacement rate：為設定值的±0.2%以內；Within ±0.2% of the set value

附具配置 Accessory

拉伸、壓縮、彎曲、剪切、剝離、撕裂等標準或特殊夾具可選擇An option of standard accessories for tension,compression,bending or special grips

電源電壓Voltage

～220V±10% 50Hz；

～380V±10% 50Hz；

主機外型尺寸(長寬高)Dimension of the main machine(L*W*H)mm

660×415×1500

740×450×1600

755×520×1780

850×555×1900

1050×750×2600mm

1260×1150×2560mm