
項目名稱 Items | 技術參數 Technical Parameters |
拉拔道次 NO.of Drafts | ~9 |
設計速度 Design Speed | 10m/s |
進線直徑 Max.Inlet Wire Diameter | Ф16mm |
進線強度 Inlet Wire Length | ≤1250MPa |
最小出線直徑 Min.Outlet Wire Diameter | Ф3mm |
道次平均縮率 Average Pass Reduction | 20% |
卷筒直徑 Drum Diameter | Ф1200mm |
卷筒表面處理方法 Drum Surface Treatment | 整體表面淬火 Overall Surface Hardening |
卷筒表面硬度 Drum Surface Hardness | ≥HRC55 |
卷筒冷卻方式 Drum Cooling Mode | 水冷和風冷 Water Cooling & Air Cooling |
動力配置 Motor Power | 90~132KW |
傳動方式 Drive Mode | 硬齒面減速器 Speed Regulator of Hardened Tooth Surface |
調速方式 Speed Control | 變頻交流 AC Frequency Converting |
控制方式 Motor Control | PLC總線控制 PLC Control |
收線配備工字輪尺寸 Take-up Spool Size | 1120/1250 |